Enter the mass flow regulation for a rule element in the dialog "mass flow regulations".

Either the feeding mass flow of a supplier or a firm mass flow can be given as a desired value. The default of a given mass flow only makes sense, however, if the rule element is in a hydraulic mesh.

• • Control name – Name of the regulation, which must be unique within the regulations.
• • Controlled Element – use this Combination field to select the pump or valve to be regulated.
  Note: The field is deactivated as soon as the control is in use by a network calculation.
• • Supplier – By marking the selection field in the combination field, you activate the selection of the supplier whose feeding value (mass flow, flow rate or performance as displayed in the distribution of load) is to be brought into the network.
• • Mass Flow/ Flow Rate – By marking the appropriate selection field you activate the input field mass flow or flow rate and can enter the desired mass flow for the regulation.